Cement silo installation method

1. Preparation before installation

Determine the installation site: select a solid, flat, and unobstructed site to ensure that the bearing capacity of the installation ground can meet the requirements.

Prepare installation tools: prepare special tools such as cranes, wire ropes, and pneumatic screwdrivers.

Prepare installation personnel: professional engineers and technicians are required to install to ensure that the installation process is safe and reliable.

2. Precautions during installation

Fix the base: fix the base on the ground.

Lift the silo: lift the silo with a crane, place it vertically on the base, adjust the position, and ensure that the silo is vertical to the base.

Install the pneumatic system: perform an air tightness test after installing the pneumatic system to ensure that the pneumatic system works properly.

Install accessories: install valves, pipes and other accessories on the silo.

Confirm that the installation is complete: check and confirm that the cement silo has been fully installed as required, and there are no loose parts or air leaks that have not been fixed.

<< Previous：Concrete mixing and feeding sequence instructions
<< Next：How to match a 120 concrete mixing station?