The JDC350 concrete mixer is a single-shaft mixer that integrates mechanical and electrical components. It is driven by cylindrical gears and works reliably. The loading mechanism uses a lifting motor, which is stable and safe. The unloading mechanism uses gear transmission to rotate the mixing drum. The material is discharged quickly and cleanly. The operation is very simple. It can mix plastic, dry-hard, and lightweight aggregate concrete. It has the characteristics of good mixing quality, high production efficiency, low energy consumption and low noise. It is widely used in the construction of small and medium-sized concrete precast plants and highways, bridges, water conservancy terminals and civil projects.
The mixing system consists of a mixing shaft, a mixing tank, a shaft end sealing mechanism, a support, etc. The mixing shaft is placed in the center of the mixing tank in a horizontal position. The mixing station is equipped with mixing blades and left and right scrapers. The mixing tank is equipped with arc lining plates and end lining plates.
The transmission system of the JDC350 mixer is mainly composed of a motor, a mixing reduction gearbox, a coupling, and a mixing shaft. The motor is directly mounted on an end face fixed to the chassis of the frame, and the final power is driven by gears and linkages to rotate the stirring shaft for stirring.
The water supply system consists of motors, water pumps, throttle valves, cleaning devices, water spray pipes, etc. The water required for mixing concrete is sent by the water pump to the water spray pipe through the throttle valve, and the throttle valve can adjust the flow of water.
When loading, put the mixture to be stirred in the hopper, start the loading system, and the wire rope pulls the hopper upward. When it reaches a certain height, the hopper enters the loading rack, the bucket door opens automatically, and the materials are discharged into the mixing drum through the funnel. Inside.
