Things to note when using dry-mix mortar equipment in summer

When using dry-mix mortar equipment in summer, there are several issues that need to be paid attention to:

1. Temperature management: Higher temperatures in summer will cause the mortar to dry quickly and affect the construction quality. Therefore, the temperature at the construction site needs to be controlled. You can take shading measures or use methods such as water spraying during construction to keep the mortar moist and slow down the drying speed.

2. Humidity control: Under high temperature and low humidity climate conditions, mortar easily loses moisture, resulting in a decrease in strength. Therefore, ensure that the humidity at the construction site is appropriate. Unused mortar can be covered with a damp cloth to prevent it from losing moisture prematurely.

3. Construction time selection: Avoid construction at noon when the temperature is the highest. You can choose to carry out construction in the morning or evening when the temperature is lower. This can reduce the drying speed of the mortar and facilitate the control of the construction process.

4. Mortar quality inspection: High temperatures in summer can easily cause mortar to deteriorate, leading to a decline in construction quality. Before using dry-mix mortar equipment, the quality of the mortar should be carefully checked to ensure that it meets the standard requirements. If the mortar quality is found to be substandard, it should be replaced in time.

5. Cement storage: High temperature will affect the quality of cement, causing its early strength to decrease. Therefore, before using dry-mix mortar equipment in summer, cement should be properly stored to avoid exposure to high temperatures and minimize quality loss.

<< Previous：How to reduce environmental pollution from concrete mixing stations?
<< Next：What equipment does a concrete mixing plant include?