During the operation and production of dry mortar equipment, the following are the places where dust is easily generated:
1. Raw material feeding area: When adding raw materials (such as cement, lime, stone powder, etc.) to the equipment, dust will be generated due to the transportation and dumping of the materials.
2. Mixing area: During the mixing process of dry mortar equipment, materials will be stirred and ground, resulting in the emission of fine particles.
3. Conveyor belts and bucket elevators: These devices are used to transport materials from one working area to another. The materials will be subject to friction and bumps during the transportation process, producing dust.
4. Crushing and grinding equipment: If raw materials need to be crushed or ground during the production process, these equipment will produce a large amount of dust.
5. Cleaning and unloading area: After the equipment stops running, the equipment needs to be cleaned and maintained, which may lead to the generation of dust. In addition, operations in the unloading area may generate dust.
In order to control and reduce the generation of dust, the following measures can be taken:
1. Install dust collection systems: Install dust collectors and filters in key areas to capture and collect generated dust.
2. Provide ventilation system: Provide a good ventilation system for equipment and work areas to discharge dust outdoors or filter it.
3. Use dust-proof measures: Operators should wear appropriate personal protective equipment such as dust masks, protective glasses, and dust-proof clothing.
4. Regularly clean and maintain equipment: Clean the equipment regularly and ensure the sealing and normal operation of the equipment to reduce the leakage and spread of dust.
5. Training and awareness raising: Provide training to operators, teach correct operating methods and dust control measures, and enhance their awareness and sense of responsibility.
<< Previous:The process flow of producing 300 tons of dry mortar per day
<< Next:What are the advantages of twin horizontal concrete mixers?