How to clean the remaining concrete in the main machine of the mixing station

Every time the concrete mixer is discharged, there will be residue. If it is not cleaned for a long time, it will easily stick, especially the position of the mixing shaft and the discharge port. The common cleaning method is to flush with water, but due to the nature of concrete, simply flushing with water will not work well. To clean the residual concrete, let’s introduce a super simple method to deal with the residual concrete of the mixing station host.

Let's take a concrete mixer as an example. We choose the kilogram amount of stones to use according to the ratio (note: only stones are needed, other materials are not required). The stones are mixed for 2 to 3 minutes. The purpose is to make the bonding or bonding strength stronger. After grinding the low-grade concrete, it is generally better to clean it once a day or once per shift; if it is not cleaned for a long time, the bonded concrete will be strong, so in addition to rubbing it with stones, it also needs to be cleaned with an iron drill or hammer. . Cleaning the concrete mixer is a daily task, so it should be cleaned as soon as it is discovered.

Remember: When workers are cleaning the residue from the mixer, they must cut off all power and lock the control room door. At least two people must work together when cleaning the mixer, and there must be a dedicated person to supervise it to avoid accidents.

<< Previous：Welcome customers to our upcoming exhibition in Indonesia
<< Next：Back to list